This high-grade brass stock sheet provides exceptional performance in demanding pressure and temperature control systems. Its specific dimensions and material composition ensure reliable functionality and longevity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.035" |
| Length | 42" |
| Width | 28" |
Built to exacting engineering tolerances, this brass stock sheet (0.035" thickness, 42" length, 28" width) is fabricated from a premium brass alloy known for its excellent corrosion resistance, thermal conductivity, and machinability. This material is ideal for fabricating components such as diaphragms, valve seats, and heat exchanger plates within pressure and temperature regulation systems. Its controlled temper and dimensional accuracy guarantee consistent performance and ease of integration into complex assemblies, meeting stringent industrial requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free from contaminants. 2. Carefully cut or machine the sheet to the required component dimensions using appropriate tooling. 3. Integrate the fabricated component into the pressure or temperature control system, following specific design guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to deformation or burrs. | Employ sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and prevent material damage. |
| Inadequate surface preparation before integration, causing leaks or performance issues. | Thoroughly clean and deburr all edges and surfaces of the fabricated brass component before assembly to ensure a proper seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator diaphragms, Temperature control valve components, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||