This high-performance brass stock sheet is engineered for critical hydraulic systems. Its robust dimensions and superior brass alloy ensure exceptional durability, corrosion resistance, and reliable operation in demanding fluid power environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.436" |
| Length | 42" |
| Width | 41" |
A high-performance industrial component, this brass stock sheet (0.436" thickness, 42" length, 41" width) is manufactured from a premium brass alloy, selected for its excellent machinability, inherent corrosion resistance to a wide range of hydraulic fluids, and good thermal conductivity. These properties make it ideal for fabricating precision components such as valve bodies, manifold blocks, hydraulic fittings, and pump housings where dimensional stability and long-term integrity are paramount. The precise dimensions ensure consistent material yield and predictable machining outcomes for complex geometries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the specific hydraulic fluid and operating environment. 2. Ensure the sheet is properly supported during cutting and machining operations to prevent warping. 3. Follow standard machining practices for brass, utilizing appropriate tooling and lubrication for optimal results and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for highly corrosive hydraulic fluids. | Select a dezincification-resistant (DR) brass alloy or a higher-grade copper alloy if the hydraulic fluid is known to be aggressive. |
| Improper handling during machining, leading to surface defects. | Employ sharp tooling, appropriate cutting speeds and feeds, and adequate coolant/lubrication to maintain surface integrity and dimensional accuracy. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Valve Bodies, Manifold Blocks, Hydraulic Fittings and Connectors, Hydraulic Pump Components, Pressure Control Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||