This premium brass stock sheet, precisely manufactured to 0.545" thickness, offers exceptional durability and corrosion resistance for demanding pressure and temperature control systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.545" |
| Length | 33" |
| Width | 45" |
A high-performance industrial component, this brass stock sheet is engineered for critical applications within pressure and temperature control systems. Measuring 0.545 inches in thickness, with dimensions of 33 inches in length and 45 inches in width, it provides a substantial material volume for fabrication and structural integrity. The inherent properties of brass, including its excellent thermal conductivity, machinability, and resistance to a wide range of fluids and gases, make it an ideal choice for components subject to thermal cycling and moderate pressure environments. Its composition ensures reliable performance and longevity in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions for the specific component. 3. Securely fasten the fabricated brass component using appropriate industrial-grade fasteners and sealing methods, ensuring full contact and a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of brass for the specific fluid or temperature range. | Consult material compatibility charts and specify brass alloys (e.g., C36000 for free machining, C46400 for naval applications) that are rated for the intended operating conditions and media. |
| Inadequate consideration of thermal expansion/contraction during design and installation. | Account for the coefficient of thermal expansion of brass in the design of mating components and installation procedures to prevent stress buildup and potential failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Valve and fitting bodies for control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||