This robust brass stock sheet is engineered for exceptional performance in critical pressure and temperature control systems. Its substantial thickness and durable material ensure reliability under extreme conditions.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.874" |
| Length | 46" |
| Width | 24" |
Purpose-built for heavy-duty applications, this brass stock sheet offers superior strength and dimensional stability. With a precise thickness of 0.874 inches, a length of 46 inches, and a width of 24 inches, it is manufactured from high-grade brass, known for its excellent corrosion resistance, high thermal conductivity, and good machinability. These properties make it ideal for fabricating robust components such as heat exchangers, pressure vessel liners, valve bodies, and critical manifold assemblies within demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before fabrication. 2. Precisely cut and machine to required component specifications. 3. Integrate into the pressure/temperature control system using appropriate joining and sealing techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-pressure, high-temperature applications without verifying alloy composition. | Always confirm the specific brass alloy's suitability for the intended operating pressures and temperatures. Consult material data sheets for specific grade limitations. |
| Improper welding or brazing techniques leading to material fatigue or leaks. | Employ welding or brazing procedures specifically recommended for the brass alloy being used, ensuring proper filler material selection and heat control. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Construction, Pressure Vessel Components, High-Performance Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||