This robust brass stock sheet is engineered for heavy-duty pulling and lifting applications. Its substantial thickness and high-quality brass composition ensure exceptional strength and longevity in challenging industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.529" |
| Length | 31" |
| Width | 38" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.529 inches, a generous length of 31 inches, and a width of 38 inches. The inherent properties of brass, including its excellent tensile strength, high electrical conductivity, and remarkable corrosion resistance, make it an ideal material for components subjected to significant mechanical stress and potential exposure to harsh elements. This sheet is suitable for fabricating custom sheaves, pulleys, reinforcement plates, and structural elements within pulling and lifting machinery, ensuring reliable performance and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the pulling or lifting mechanism using high-strength fasteners and adhering to load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or improper fastening techniques. | Always utilize fasteners rated for the calculated load and ensure they are installed to the manufacturer's recommended torque specifications. |
| Exposing the brass to aggressive chemicals without prior compatibility testing. | Consult chemical compatibility charts or perform testing to confirm brass's suitability for the intended operating environment. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom sheave fabrication, Reinforcement plates for lifting equipment, Structural components in winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||