Engineered for robust performance in pulling and lifting applications, this substantial brass stock sheet offers exceptional strength and corrosion resistance, ensuring reliability in harsh environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.885" |
| Length | 36" |
| Width | 42" |
Manufactured under strict quality controls, this brass stock sheet boasts superior tensile strength and excellent ductility, making it ideal for dynamic load-bearing scenarios. The 0.885" thickness provides significant structural integrity, while the 36" x 42" dimensions offer ample material for fabrication. Its inherent non-sparking properties and resistance to corrosion make it a preferred choice for environments where safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using appropriately rated hardware and techniques for the intended pulling or lifting load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect fasteners. | Always utilize fasteners rated for the expected load and compatible with brass to prevent premature failure. |
| Inadequate surface preparation before mounting. | Thoroughly clean and inspect the mounting surface for any debris or damage that could compromise the installation's integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Crane boom reinforcements, Specialized rigging plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||