Robust brass stock sheet engineered for superior performance in strenuous pulling and lifting operations. Its substantial thickness and dimensions ensure reliability under heavy loads in industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.182" |
| Length | 38" |
| Width | 15" |
Designed for demanding industrial environments, this brass stock sheet offers exceptional strength and corrosion resistance, making it ideal for components in pulling and lifting equipment. Manufactured from high-grade brass with a thickness of 0.182 inches, a length of 38 inches, and a width of 15 inches, it exhibits superior tensile strength and durability. Its non-sparking properties are also advantageous in potentially hazardous environments. This material provides excellent machinability for custom fabrication and assembly into critical load-bearing parts, ensuring long service life and operational safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Precisely align the brass stock sheet with pre-drilled holes or attachment points. 3. Securely fasten using appropriately rated hardware, torquing to manufacturer specifications for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or standard fasteners not rated for the load capacity. | Always utilize fasteners that are specifically rated for the anticipated tensile and shear loads of the pulling or lifting application. |
| Improper surface preparation leading to uneven contact or stress concentration. | Thoroughly clean and flatten the mounting surface to ensure uniform pressure distribution across the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Fabrication of custom lifting eye bolts and hardware, Reinforcement plates for pulley systems, Components for winches and hoisting mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||