This robust brass stock sheet, engineered for hydraulic systems, offers exceptional corrosion resistance and formability. Its substantial dimensions facilitate diverse fabrication needs in demanding fluid power environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.661" |
| Length | 37" |
| Width | 39" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.661 inches, a length of 37 inches, and a width of 39 inches. Composed of high-grade brass alloys, it exhibits excellent machinability, inherent corrosion resistance against a wide range of hydraulic fluids, and good tensile strength suitable for pressure-bearing components. The precise dimensions ensure consistent performance and ease of integration into custom hydraulic manifold designs, valve bodies, and specialized fittings where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Machine or fabricate sheet into the required component geometry. 3. Clean the fabricated component thoroughly to remove all machining debris and residues.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect brass alloy for specific hydraulic fluid compatibility. | Consult material data sheets and hydraulic fluid compatibility charts to select the appropriate brass alloy for the intended application. |
| Inadequate surface preparation leading to poor sealing. | Ensure all mating surfaces are precisely machined, smooth, and free from imperfections to guarantee leak-free hydraulic connections. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Custom Valve Bodies, High-Pressure Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||