This robust brass stock sheet offers superior corrosion resistance and machinability, making it an essential component for intricate hydraulic systems and fluid power applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.247" |
| Length | 36" |
| Width | 45" |
Manufactured under strict quality controls, this brass stock sheet features a precise thickness of 0.247 inches, a standard length of 36 inches, and a width of 45 inches. Composed of a high-copper alloy, it exhibits excellent ductility and tensile strength, crucial for withstanding high pressures and operational stresses inherent in hydraulic systems. Its inherent resistance to galvanic corrosion ensures longevity in diverse fluid environments, minimizing maintenance requirements and preventing system contamination.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is cut to the required dimensions using appropriate metal cutting tools. 2. Deburr all edges thoroughly to prevent stress risers and ensure a smooth finish. 3. If machining is required, use high-speed steel or carbide tooling with adequate lubrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to material deformation or poor edge quality. | Utilize specialized brass cutting tools or ensure standard tools are sharp and appropriate for non-ferrous metals. |
| Failing to deburr edges, creating potential points of weakness or hazards during assembly and operation. | Always perform thorough deburring on all cut edges to ensure a clean and safe finish. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold blocks, Fluid power system components, Custom fittings and adapters.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||