This robust brass stock sheet is engineered for high-pressure hydraulic systems. Its precise dimensions and superior material properties ensure reliability and longevity in critical fluid power applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.978" |
| Length | 25" |
| Width | 31" |
A high-performance industrial component, this brass stock sheet offers exceptional resistance to corrosion and erosion, vital for hydraulic fluid containment and structural elements. Manufactured from a premium brass alloy, it exhibits excellent machinability, allowing for intricate component fabrication. With precise dimensions of 0.978 inches in thickness, 25 inches in length, and 31 inches in width, it meets stringent industry standards for hydraulic manifold blocks, valve bodies, and specialized fittings where integrity and leak-proof performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping operations are performed within specified tolerances. 2. Deburr all edges thoroughly to prevent particulate contamination. 3. Clean the surface meticulously to remove any residual machining fluids or debris prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Failure to properly deburr edges after cutting. | Thoroughly deburr all cut edges using a suitable tool to prevent material shedding into the hydraulic system. |
| Using incompatible cleaning agents that could corrode or contaminate the brass. | Employ only approved, non-corrosive cleaning solvents recommended for brass, ensuring complete drying before assembly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Valve Bodies, Specialized Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||