This premium brass stock sheet offers exceptional formability and conductivity. Precisely manufactured to 0.056" thickness, 25" length, and 17" width, it's engineered for diverse fabrication needs.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.056" |
| Length | 25" |
| Width | 17" |
Engineered for reliability and performance, this brass stock sheet boasts a 0.056" nominal thickness, ensuring consistent material density and structural integrity. Its composition of approximately 60-70% copper and 30-40% zinc provides excellent machinability, corrosion resistance, and electrical conductivity, making it suitable for a wide range of demanding applications. The dimensions of 25" in length and 17" in width offer ample material for intricate custom parts, shielding, or decorative embellishments. Adheres to industry standards for brass alloys.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the brass stock sheet thoroughly using an appropriate degreaser. 2. Precisely measure and mark the desired cut lines using a scribe or marking tool. 3. Utilize a suitable cutting method (e.g., shear, saw) to achieve the required dimensions, ensuring clean edges and minimal deformation. 4. Proceed with fabrication, bending, or assembly as per project requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Attempting to cut with standard utility knives. | Use specialized metal shears or saws designed for brass to achieve clean, precise cuts without tearing or excessive force. |
| Neglecting to deburr cut edges. | Always deburr cut edges with a file or deburring tool to remove sharp fragments and ensure safe handling and proper fitment. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of hardware components, Electrical contacts and connectors, Decorative inlays and trim.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||