This robust brass stock sheet offers exceptional strength and corrosion resistance, specifically engineered for critical pulling and lifting operations. Its substantial thickness and dimensions ensure reliable performance in heavy-duty industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.741" |
| Length | 38" |
| Width | 39" |
Manufactured under strict quality controls, this brass stock sheet features a precise thickness of 0.741 inches, a length of 38 inches, and a width of 39 inches. Composed of high-purity brass, it exhibits superior tensile strength and excellent resistance to environmental degradation, making it ideal for applications requiring a non-sparking, non-magnetic material. Its dimensional stability ensures consistent load bearing and operational integrity under stress. This sheet is designed to meet the rigorous demands of environments where safety and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface damage or defects prior to installation. 2. Ensure mounting surfaces are clean, flat, and free of debris. 3. Securely fasten the sheet using appropriately rated hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inadequate fasteners. | Always use fasteners that are rated for the specific load capacity and compatible with brass to prevent premature failure or damage. |
| Over-tightening fasteners, leading to deformation. | Apply torque evenly and to the manufacturer's recommended specifications to avoid stressing the brass sheet and compromising its integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for lifting gear, Custom fabricated sheaves and pulleys, Wear plates in heavy machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||