This robust brass stock sheet, engineered to precise specifications, is ideal for constructing critical components within pressure and temperature control systems. Its dense structure ensures reliability in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.446" |
| Length | 24" |
| Width | 21" |
Built to exacting engineering tolerances, this 0.446" thick brass stock sheet offers superior dimensional stability for demanding applications. Composed of a high-copper alloy (typically UNS C26000 or similar), it exhibits excellent corrosion resistance, good thermal conductivity, and is readily machinable. Its substantial thickness provides the necessary structural integrity for high-pressure containment and thermal regulation. This material is specifically chosen for its proven performance in instrumentation, valve bodies, heat exchangers, and other components subjected to fluctuating pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely machine the brass stock to the required component dimensions. 3. Integrate the finished component into the pressure or temperature control system, adhering to established assembly protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner material than specified for high-pressure applications. | Always verify that the selected material thickness meets or exceeds the pressure and safety requirements of the system. |
| Inadequate surface preparation before machining, leading to tool wear or poor finishes. | Thoroughly clean the brass stock and ensure proper clamping to prevent vibration during machining operations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Vessel Fabrication, Temperature Regulator Components, Heat Exchanger Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||