High-performance brass stock sheet engineered for critical pressure and temperature control systems. Offers superior durability, excellent machinability, and robust corrosion resistance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.671" |
| Length | 40" |
| Width | 23" |
Built to exacting engineering tolerances, this brass stock sheet (0.671" thickness, 40" length, 23" width) is manufactured from high-grade brass alloys known for their excellent thermal conductivity and resistance to dezincification. Its precise dimensions ensure seamless integration into complex assemblies within pressure and temperature regulation equipment. The material's inherent strength and stability make it suitable for applications experiencing fluctuating thermal cycles and high operational pressures, guaranteeing long-term reliability and performance in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, free of debris, and precisely machined. 2. Apply a suitable sealant or gasket material appropriate for the operating pressure and temperature. 3. Securely fasten the brass stock sheet using appropriately rated fasteners, following torque specifications for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fastener torque, leading to leaks or material deformation. | Consult application-specific torque charts or engineering drawings for precise fastener tightening procedures. |
| Inadequate surface preparation, resulting in compromised seal integrity. | Thoroughly clean and inspect mating surfaces for flatness and absence of contaminants before assembly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Components, Pressure Vessel Liners, Temperature Control Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||