This precision brass stock sheet is engineered for demanding pressure and temperature control systems. Its robust composition ensures reliability and longevity in critical industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.473" |
| Length | 34" |
| Width | 40" |
Precision-manufactured to tight tolerances, this 0.473-inch thick brass stock sheet measures 34 inches in length and 40 inches in width. Composed of a high-copper alloy, it exhibits excellent thermal conductivity, corrosion resistance, and machinability, making it ideal for fabricating pressure vessels, heat exchangers, and control valve components. Its consistent material properties ensure predictable performance under varying thermal and pressure loads, crucial for maintaining system integrity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and sealing methods, adhering to pressure and temperature ratings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and deburr all mating surfaces before installation. |
| Over-tightening fasteners, causing material deformation. | Use torque wrenches and follow recommended tightening sequences for the specific application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Control valve bodies and internal parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||