This robust brass stock sheet, precisely engineered at 0.527 inches thick, 34 inches long, and 13 inches wide, offers exceptional thermal conductivity and durability for critical heating and cooling systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.527" |
| Length | 34" |
| Width | 13" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting standards, featuring a substantial thickness of 0.527 inches, a generous length of 34 inches, and a practical width of 13 inches. Its inherent properties as brass, including excellent thermal conductivity and superior corrosion resistance, make it an ideal material for heat exchangers, radiant heating panels, and other critical components within demanding HVAC and industrial cooling environments where efficient heat transfer and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and sealing methods for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor thermal contact. | Thoroughly clean and degrease all mating surfaces before installation to maximize heat transfer efficiency. |
| Over-tightening fasteners, causing deformation or stress on the sheet. | Use calibrated torque wrenches and follow manufacturer recommendations for fastener tightening to prevent material damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Fabrication, Radiant Heating Systems, Industrial Cooling Coils.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||