This premium brass stock sheet, engineered to precise dimensions, offers exceptional durability and corrosion resistance, making it the superior choice for high-pressure hydraulic systems and components.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.441" |
| Length | 45" |
| Width | 40" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.441 inches, a length of 45 inches, and a width of 40 inches. Its brass composition ensures excellent machinability, good thermal conductivity, and inherent resistance to dezincification and corrosion, critical for maintaining the integrity of hydraulic fluid pathways and components. This material's reliability under pressure and its compatibility with various hydraulic fluids make it ideal for manifold blocks, valve bodies, and fluid connectors in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of any debris or contaminants. 2. Precisely cut the sheet to the required dimensions for the intended hydraulic component. 3. Machine or form the cut material according to design specifications, adhering to tolerances for critical mating surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for hydraulic pressure. | Always specify and verify that the brass used meets the required tensile strength and corrosion resistance standards for hydraulic applications. |
| Inadequate surface preparation after machining. | Ensure all machined surfaces are properly deburred and cleaned to prevent flow restrictions or seal damage within the hydraulic system. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Valve Bodies and Components, Hydraulic Fluid Connectors and Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||