Engineered for extreme environments, this robust brass stock sheet delivers exceptional performance in pulling and lifting tasks. Its substantial thickness and alloy composition ensure reliable strength and longevity under heavy loads.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.890" |
| Length | 20" |
| Width | 31" |
Purpose-built for heavy-duty applications, this brass stock sheet measures a substantial 0.890 inches in thickness, 20 inches in width, and 31 inches in length. Crafted from a high-grade brass alloy, it exhibits excellent tensile strength and exceptional resistance to corrosion and wear, making it ideal for demanding industrial environments. Its inherent non-sparking properties further enhance its suitability for use in hazardous or potentially explosive atmospheres, providing a critical safety feature for critical lifting and pulling mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare mounting surfaces thoroughly, ensuring they are free of debris and contaminants. 2. Carefully position the brass stock sheet, aligning it with pre-drilled holes or designated attachment points. 3. Secure the sheet using appropriately rated fasteners, ensuring even torque distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the heavy-duty nature of the sheet. | Always select fasteners with a shear strength and tensile strength that significantly exceeds the expected load to ensure structural integrity. |
| Installing the sheet in environments with aggressive chemical exposure without verifying brass alloy compatibility. | Consult chemical resistance charts for the specific brass alloy and the expected chemicals to prevent premature degradation or failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom winch and hoist component fabrication, Reinforcement plates for heavy-duty lifting slings, Specialized structural elements in marine pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||