This premium brass stock sheet is engineered for robust pulling and lifting applications. Its substantial 0.208-inch thickness and generous dimensions provide the strength and surface area required for demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.208" |
| Length | 23" |
| Width | 14" |
Engineered for reliability and performance, this brass stock sheet offers exceptional strength and corrosion resistance. With a thickness of 0.208 inches, a length of 23 inches, and a width of 14 inches, it provides a substantial material platform. The inherent properties of brass, including its high tensile strength, malleability, and resistance to galvanic corrosion, make it an ideal choice for components subjected to significant mechanical stress and environmental exposure in pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that can lead to material fatigue. | Always utilize fasteners rated for the load capacity and thickness of the brass sheet. |
| Improper alignment causing uneven stress distribution on the sheet. | Utilize alignment jigs or templates for precise placement before fastening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for lifting slings, Structural components in heavy-duty winches, Wear pads for pulley systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||