This robust brass stock sheet provides exceptional strength and corrosion resistance, making it ideal for fabricating critical hydraulic components. Its precise dimensions ensure seamless integration into complex systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.566" |
| Length | 14" |
| Width | 29" |
Precision-manufactured to tight tolerances, this brass stock sheet offers superior performance in demanding hydraulic environments. With a thickness of 0.566 inches, a length of 14 inches, and a width of 29 inches, it's crafted from high-grade brass known for its excellent machinability, ductility, and resistance to a wide range of hydraulic fluids and environmental stressors. This material composition ensures longevity and prevents premature failure due to corrosion or fatigue in high-pressure systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before cutting. 2. Fabricate to required component specifications using appropriate machining techniques. 3. Ensure all edges are deburred and surfaces are clean before assembly into hydraulic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or burrs. | Employ sharp, high-quality cutting tools specifically designed for brass to maintain dimensional accuracy and a clean edge. |
| Failing to properly deburr edges after cutting, which can compromise sealing integrity. | Thoroughly deburr all cut edges to ensure a smooth, uniform surface that will not impede sealing or cause fluid leakage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold fabrication, Hydraulic valve components, Hydraulic fitting blanks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||