This robust brass stock sheet is engineered for critical pressure and temperature control systems. Its substantial thickness and precise dimensions ensure reliable performance in demanding industrial environments, offering exceptional durability and resistance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.974" |
| Length | 23" |
| Width | 29" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting standards, measuring 0.974 inches in thickness, 23 inches in length, and 29 inches in width. Composed of high-quality brass, it exhibits excellent thermal conductivity and corrosion resistance, making it ideal for applications involving pressure regulation and temperature management. Its dense microstructure and machinability facilitate precise fabrication into custom components for valves, fittings, and heat exchangers, ensuring optimal system integrity and longevity under varying operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify the stock sheet dimensions and surface finish against project requirements. 2. Prepare the mating surfaces for optimal gasket or seal engagement. 3. Install the brass component according to system design specifications, ensuring proper torque and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and compromised edge integrity. | Employ sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and minimize post-processing. |
| Inadequate cleaning of the brass surface before assembly, leading to contamination. | Thoroughly clean the brass surface with a suitable degreaser and lint-free cloth before installation to remove oils, dirt, and debris. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Vessel Components, Heat Exchanger Plates, Valve Bodies and Internals, High-Pressure Fluid Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||