This robust brass stock sheet is engineered for demanding pressure and temperature control applications. Its substantial thickness and precise dimensions ensure superior performance and longevity in critical systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.958" |
| Length | 22" |
| Width | 19" |
A high-performance industrial component, this brass stock sheet boasts a significant thickness of 0.958 inches, a length of 22 inches, and a width of 19 inches. Fabricated from high-grade brass, it exhibits excellent machinability, exceptional corrosion resistance, and superior thermal conductivity, making it ideal for components subjected to fluctuating pressures and temperatures. Its inherent strength and durability ensure reliable operation in harsh industrial environments, minimizing the risk of failure and extending service life in critical control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the specific component. 3. Carefully integrate the custom-fabricated component into the pressure or temperature control system, adhering to all relevant engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for high-pressure or high-temperature environments. | Verify the specific brass alloy's grade and its suitability for the intended operating pressure and temperature range. |
| Inadequate material thickness selection for the anticipated load and thermal stress. | Perform thorough stress analysis and thermal calculations to determine the minimum required material thickness for safe and reliable operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Vessel Components, Heat Exchanger Plates, Valve Bodies and Internals, Temperature Regulating Mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||