This premium brass stock sheet, engineered to precise standards, offers exceptional thermal conductivity and corrosion resistance, making it an ideal component for demanding heating and cooling systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.954" |
| Length | 46" |
| Width | 42" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.954 inches in thickness, 46 inches in length, and 42 inches in width. Composed of a high-copper alloy, it exhibits superior thermal conductivity (approximately 120 W/m·K) and excellent resistance to galvanic corrosion, crucial for maintaining system integrity in diverse thermal management applications. Its robust nature ensures longevity and reliable performance under continuous thermal cycling and varying pressure conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to the required dimensions using appropriate metalworking tools. 3. Securely install using approved fastening methods to maintain structural integrity and thermal contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning leading to surface contamination affecting thermal transfer. | Thoroughly degrease and clean all surfaces before installation. |
| Over-stressing the material during bending or forming, potentially causing micro-fractures. | Utilize controlled bending radii and avoid sharp creases to maintain material integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Coils, Radiator Components, Thermal Transfer Plates, HVAC Piping and Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||