This robust brass stock sheet offers exceptional durability and non-sparking properties, making it a premium choice for critical pulling and lifting operations in corrosive or hazardous environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.910" |
| Length | 21" |
| Width | 13" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.910-inch thickness, paired with a generous 21-inch length and 13-inch width. Crafted from high-grade brass, it exhibits excellent tensile strength, superior corrosion resistance, and inherent non-sparking characteristics, crucial for applications in environments where ignitable vapors or dust may be present. Its substantial mass and material properties ensure it can withstand significant loads and repeated stress cycles, making it suitable for fabricating custom rigging components, heavy-duty sheaves, and robust structural elements within pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clean and free of debris. 2. Position the brass stock sheet according to the design requirements. 3. Securely fasten the sheet using appropriate industrial-grade fasteners or welding techniques suitable for brass, considering load-bearing capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the load or environment. | Employ high-strength, corrosion-resistant fasteners specifically chosen to match the brass material and the operational loads. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease the brass surfaces to ensure optimal weld penetration and structural integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom rigging component fabrication, Heavy-duty sheave and pulley construction, Structural reinforcement in marine and offshore lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||