This robust brass stock sheet offers exceptional durability and corrosion resistance, making it ideal for critical pressure and temperature control systems. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.890" |
| Length | 26" |
| Width | 25" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.890 inches thick, 26 inches in length, and 25 inches in width. Composed of high-grade brass, it exhibits excellent thermal conductivity and resistance to a wide range of chemicals and high pressures, commonly utilized in heat exchangers, valve components, and pressure vessel fabrication. Its malleability allows for intricate shaping while maintaining structural integrity under extreme operating conditions. The inherent non-sparking properties further enhance safety in volatile environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Position the brass stock sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fasteners or welding techniques, adhering to pressure and temperature containment requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners or welding materials that could lead to galvanic corrosion. | Always select fasteners and welding consumables that are compatible with brass and the intended operating environment to prevent corrosion. |
| Improperly preparing mating surfaces, leading to leaks or reduced sealing effectiveness. | Thoroughly clean and ensure flatness of all mating surfaces before installation to guarantee a secure and leak-free seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Vessel Fabrication, Heat Exchanger Components, High-Pressure Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||