This high-grade brass stock sheet offers exceptional durability and corrosion resistance, making it ideal for demanding pressure and temperature control systems where reliability is paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.888" |
| Length | 44" |
| Width | 41" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.888 inches thick, 44 inches in length, and 41 inches in width. Composed of a high-copper alloy, it exhibits excellent thermal conductivity and machinability, crucial for fabricating precise components used in regulating fluid and gas flow under varying pressure and temperature conditions. Its inherent antimicrobial properties and resistance to dezincification ensure longevity and performance in critical control infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Accurately cut sheet to required dimensions using appropriate tooling. 3. Fabricate and install components according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs and deformation. | Utilize high-quality carbide or diamond-tipped cutting blades designed for brass to ensure clean edges. |
| Inadequate surface preparation before fabrication, causing poor adhesion or sealing. | Thoroughly clean and degrease the brass surface before any bonding, welding, or sealing operations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator diaphragms, Temperature control valve components, Heat exchanger plates, Instrumentation fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||