This robust brass stock sheet, specifically engineered for hydraulic applications, provides superior corrosion resistance and excellent machinability for custom component fabrication.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.880" |
| Length | 27" |
| Width | 41" |
Manufactured under strict quality controls, this brass stock sheet is precisely dimensioned at 0.880 inches thick, 27 inches in width, and 41 inches in length. Composed of a high-copper alloy, it exhibits exceptional corrosion resistance, crucial for hydraulic fluid environments, and offers excellent thermal conductivity. Its inherent machinability allows for intricate component designs and precise fitting in demanding hydraulic assemblies. The material's ductility ensures it can withstand moderate forming operations without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Deburr all cut edges thoroughly to prevent premature wear or leakage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to rough edges and potential material stress. | Employ sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and minimize heat buildup. |
| Failing to properly deburr edges, which can cause galvanic corrosion or damage seals in hydraulic systems. | Utilize a deburring tool or fine-grit sandpaper to create a smooth, chamfered edge after all cuts are made. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold blocks, Custom hydraulic fittings, Hydraulic system component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||