This premium Brass Stock Sheet, engineered to exacting standards, provides exceptional performance in demanding pressure and temperature control environments. Its robust construction ensures reliability and longevity for critical system components.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.836" |
| Length | 30" |
| Width | 28" |
Specified by design engineers worldwide, this 0.836-inch thick Brass Stock Sheet (30" x 28") is manufactured from high-grade brass alloys, renowned for their excellent thermal conductivity, corrosion resistance, and machinability. Its precise dimensions and material properties make it ideal for fabricating robust valve bodies, pressure regulators, heat exchangers, and instrument housings where consistent performance under varying thermal and pressure loads is paramount. The material's inherent ductility allows for complex shaping while maintaining structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of debris. 2. Accurately cut the sheet to the required dimensions using appropriate tooling. 3. Fabricate components according to design specifications, ensuring proper joint preparation for welding or brazing if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and compromised edge integrity. | Employ sharp, high-quality cutting tools specifically designed for brass to achieve clean, precise cuts. |
| Overheating during fabrication processes, causing material degradation or discoloration. | Control heat input meticulously during welding, brazing, or forming operations to maintain the brass alloy's properties. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator diaphragms and bodies, Heat exchanger plates and tubing, Valve components and stems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||