This high-performance brass stock sheet offers exceptional durability and corrosion resistance, making it the ideal material for robust pulling and lifting components. Its substantial thickness ensures superior load-bearing capacity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.829" |
| Length | 36" |
| Width | 26" |
A proven choice for industrial professionals, this brass stock sheet (0.829" thickness, 36" length, 26" width) delivers a reliable combination of tensile strength and ductility. The inherent corrosion resistance of brass ensures longevity in demanding environments, preventing degradation from moisture or chemicals. This makes it exceptionally well-suited for fabricated components in pulling, lifting, and material handling equipment where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before fabrication. 2. Utilize appropriate cutting and shaping tools designed for brass alloys. 3. Ensure all fabricated components are properly integrated and tested according to the specific pulling or lifting system's requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or damage. | Employ carbide-tipped or high-speed steel cutting tools specifically designed for brass to ensure clean cuts and minimize stress on the material. |
| Overlooking the need for surface preparation before welding or joining. | Thoroughly clean the brass surface to remove any oils, oxides, or contaminants before any joining process to ensure a strong and reliable bond. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Fabrication of lifting hooks and eye bolts, Components for winches and hoists, Reinforcement plates in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||