This robust brass stock sheet, precisely manufactured to 0.825" thickness, 38" length, and 17" width, is engineered for demanding pressure and temperature control systems. Its inherent material properties ensure exceptional performance and longevity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.825" |
| Length | 38" |
| Width | 17" |
A high-performance industrial component, this brass stock sheet is fabricated from a premium brass alloy known for its excellent corrosion resistance, thermal conductivity, and machinability. With precise dimensions of 0.825 inches in thickness, 38 inches in length, and 17 inches in width, it is ideally suited for fabricating components within critical pressure and temperature regulation systems. The material's ductility allows for complex shaping without compromising structural integrity, making it a preferred choice for manifolds, valve bodies, heat exchangers, and other control elements requiring reliable operation under varied thermal and pressure loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against system requirements. 2. Machine to final specifications using appropriate tooling for brass. 3. Integrate into the pressure or temperature control assembly, ensuring proper sealing and connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining speeds or feeds, leading to tool wear or poor surface finish. | Consult brass machining best practices for optimal cutting parameters based on alloy composition and desired finish. |
| Inadequate consideration of thermal expansion in design, leading to stress or leakage. | Factor in the coefficient of thermal expansion of brass when designing assemblies to accommodate temperature fluctuations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel components, Temperature regulation manifold fabrication, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||