This high-performance brass stock sheet is engineered for robust hydraulic systems. Its precise dimensions and superior material properties ensure reliable performance and longevity in demanding fluid power applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.823" |
| Length | 38" |
| Width | 14" |
Precision-manufactured to tight tolerances, this brass stock sheet meets rigorous industrial standards for hydraulic component fabrication. Measuring 0.823 inches in thickness, 38 inches in length, and 14 inches in width, it is crafted from a high-tensile brass alloy known for its excellent machinability, inherent corrosion resistance to hydraulic fluids and environmental factors, and good thermal conductivity. These attributes make it an ideal material for producing valve bodies, fittings, manifolds, and other critical hydraulic system elements where leak-free operation and extended service life are paramount. The material's consistent grain structure ensures predictable behavior during manufacturing processes, leading to higher yields and reduced scrap.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or dimensional deviations before cutting. 2. Utilize appropriate cutting tools (e.g., band saw, laser cutter) designed for metal fabrication. 3. Ensure all edges are deburred and cleaned thoroughly prior to any machining or assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to poor edge quality and potential material stress. | Employ carbide-tipped blades or specialized laser cutting parameters optimized for brass to achieve clean, precise cuts and minimize material deformation. |
| Inadequate deburring of cut edges, which can lead to fluid contamination or premature seal failure in hydraulic systems. | Thoroughly deburr all cut edges using files, deburring tools, or tumbling processes to ensure smooth, contamination-free surfaces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Valve Bodies, Manifolds and Block Fabrication, Custom Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||