This premium brass stock sheet, engineered for critical hydraulic systems, offers exceptional corrosion resistance and high tensile strength. Its precise dimensions ensure seamless integration and reliable performance in demanding fluid power environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.785" |
| Length | 25" |
| Width | 46" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.785 inches in thickness, 25 inches in width, and 46 inches in length. Composed of a high-grade brass alloy, it exhibits superior machinability, excellent solderability, and remarkable resistance to a wide range of hydraulic fluids and environmental conditions. The material's inherent properties make it ideal for fabricating custom hydraulic manifold blocks, fittings, valve components, and structural elements where durability and leak-free operation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, flat, and free from contaminants. 2. Carefully position the brass stock sheet according to the hydraulic system design. 3. Secure the sheet using appropriate fastening methods, ensuring even pressure distribution and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard, non-hydraulic grade brass for critical components. | Always specify and utilize brass alloys specifically rated for hydraulic service to ensure material compatibility and long-term performance. |
| Improper surface preparation leading to leaks or premature wear. | Thoroughly clean and deburr all mating surfaces before assembly to prevent particle ingress and ensure a proper seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Fittings, Valve Component Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||