Precision-engineered brass stock sheet designed for demanding pressure and temperature control applications. Offers superior strength, durability, and excellent resistance to corrosive environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.740" |
| Length | 29" |
| Width | 22" |
Specified by design engineers worldwide, this brass stock sheet, with dimensions of 0.740 inches (18.8 mm) thickness, 29 inches (736.6 mm) length, and 22 inches (558.8 mm) width, is manufactured from high-grade brass alloys. This material exhibits an optimal balance of tensile strength, ductility, and thermal conductivity, making it ideal for components subjected to moderate to high pressures and temperature fluctuations. Its inherent corrosion resistance ensures longevity in various industrial fluids and atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. Ensure proper alignment with existing system components. 2. Secure the brass sheet using appropriate fasteners, ensuring even torque distribution to prevent stress concentrations. 3. Conduct a leak test under operational pressure and temperature conditions before final commissioning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and inspect all mating surfaces for any imperfections or contaminants before installation. |
| Over-tightening fasteners, causing deformation or cracking. | Utilize a torque wrench set to the manufacturer's recommended specifications for fasteners to ensure consistent and safe tightening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel construction, Heat exchanger plates, Valve bodies and components, Temperature regulation manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||