This robust brass stock sheet offers exceptional strength and corrosion resistance, making it ideal for heavy-duty pulling and lifting applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.739" |
| Length | 17" |
| Width | 14" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.739-inch thickness, a generous 17-inch length, and a 14-inch width, providing ample material for robust construction. Its brass composition ensures excellent tensile strength, machinability, and superior resistance to environmental degradation, making it an ideal choice for applications requiring high load-bearing capacity and longevity in corrosive or demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately mark and drill mounting holes according to design specifications. 3. Securely fasten the brass sheet using appropriate high-strength fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners. | Always use fasteners rated for the expected load and material compatibility to ensure secure attachment. |
| Improper surface preparation. | Thoroughly clean and degrease the mounting surface to ensure optimal adhesion and prevent stress concentrations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for lifting slings, Wear surfaces in heavy machinery, Custom fabrication for marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||