This robust brass stock sheet is engineered for critical pressure and temperature control applications. Its substantial 0.696" thickness and precise dimensions ensure reliability and performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.696" |
| Length | 27" |
| Width | 14" |
Specified by design engineers worldwide, this premium brass stock sheet (0.696" thickness, 27" length, 14" width) offers superior machinability and excellent corrosion resistance, characteristic of high-grade brass alloys. Its inherent thermal conductivity makes it ideal for heat transfer components, while its strength under pressure ensures integrity in fluid handling systems. This material is a staple in the design of valves, regulators, and heat exchangers requiring precise dimensioning and long-term operational stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, free of debris, and properly prepared. 2. Precisely position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, adhering to torque requirements to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks or poor sealing. | Thoroughly clean and de-grease all mating surfaces before installation. |
| Over-tightening fasteners, causing stress concentration and potential material failure. | Follow specified torque values for all fasteners to ensure even pressure distribution. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator components, Heat exchanger plates, Valve bodies and seats.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||