This high-performance brass stock sheet is engineered for demanding pressure and temperature control systems. Its robust construction ensures reliable operation in critical industrial environments, offering superior resistance and longevity.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.659" |
| Length | 46" |
| Width | 17" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.659 inches in thickness, 46 inches in length, and 17 inches in width. Composed of high-grade brass alloy, it exhibits excellent corrosion resistance, thermal conductivity, and machinability, making it ideal for applications involving fluid handling, heat exchange, and pressure regulation. Its precise dimensions ensure seamless integration into complex assemblies and contribute to the overall integrity and efficiency of pressure and temperature control systems, preventing leaks and maintaining operational stability under varying conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional accuracy and surface finish against system requirements. 2. Clean the sheet thoroughly to remove any manufacturing residues or contaminants. 3. Carefully position and secure the sheet within the designated component or assembly, ensuring proper alignment and seal integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning leading to contamination. | Always degrease and clean the brass surface before installation to prevent foreign material ingress. |
| Over-tightening fasteners causing stress concentrations. | Apply fasteners according to specified torque values to avoid deformation and potential failure points. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel components, Heat exchanger plates, Valve bodies and fittings, Regulator housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||