This robust brass stock sheet is engineered for superior performance in rigorous industrial pulling and lifting operations. Its substantial thickness and durable brass composition ensure reliability under heavy loads.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.647" |
| Length | 43" |
| Width | 17" |
Designed for demanding industrial environments, this brass stock sheet boasts exceptional strength and corrosion resistance, crucial for pulling and lifting applications. Its significant thickness of 0.647 inches, coupled with a generous length of 43 inches and width of 17 inches, provides ample material for fabricating robust components. The inherent properties of brass, including its excellent conductivity and non-sparking characteristics, make it suitable for environments where static discharge is a concern, further enhancing its utility in specialized industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the fabricated brass component to the lifting or pulling apparatus, adhering to all load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fastening hardware for the load capacity. | Always select fasteners rated for the maximum anticipated load and compatible with brass to prevent galvanic corrosion. |
| Exposing the brass to harsh chemicals that can cause degradation. | Verify chemical compatibility charts for brass before use in corrosive environments; consider protective coatings if necessary. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty custom bracket fabrication for lifting equipment, Reinforcement plates for industrial winches and hoists, Component manufacturing for specialized pulling machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||