This robust brass stock sheet is engineered for demanding pulling and lifting applications. Its substantial thickness and high-quality brass composition ensure exceptional strength and longevity in industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.641" |
| Length | 47" |
| Width | 20" |
A high-performance industrial component, this brass stock sheet is precision manufactured with a thickness of 0.641 inches, a length of 47 inches, and a width of 20 inches. Composed of high-grade brass, it exhibits excellent tensile strength, superior corrosion resistance, and non-sparking properties, making it ideal for environments where safety and durability are paramount. Its dense structure supports significant load-bearing capacities, crucial for heavy-duty pulling and lifting operations. The material's inherent ductility also allows for some formability without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and pre-drill mounting holes according to design specifications. 3. Securely fasten the brass stock sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners that cannot support the intended load. | Always specify and utilize industrial-grade fasteners (e.g., high-tensile steel bolts) that are rated for the expected shear and tensile loads. |
| Improperly aligning the sheet during installation, leading to uneven stress distribution. | Carefully align the sheet with pre-drilled holes and use pilot holes to guide fastener insertion, ensuring a flush and even fit. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty pulling assemblies, Load-bearing lifting components, Industrial rigging and hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||