This premium brass stock sheet, precisely manufactured to 0.444" thickness, 25" width, and 41" length, is engineered for exceptional performance in critical hydraulic applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.444" |
| Length | 25" |
| Width | 41" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.444" thickness, providing robust structural integrity for high-pressure hydraulic environments. Its dimensional stability, with a 25" width and 41" length, ensures efficient material utilization and minimal waste during fabrication. The inherent properties of brass, including excellent corrosion resistance, superior machinability, and good thermal conductivity, make it an ideal material for a wide array of hydraulic components. This sheet is suitable for fabricating manifolds, valve bodies, fittings, and other critical parts subjected to challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris prior to fabrication. 2. Utilize appropriate cutting and shaping tools designed for brass. 3. Follow standard industrial practices for machining and assembly of hydraulic components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without considering brass's unique properties. | Employ cutting speeds, feeds, and tooling specifically recommended for brass to prevent overheating and ensure clean cuts. |
| Inadequate surface preparation before joining or assembly. | Thoroughly clean and degrease surfaces to be joined to ensure proper adhesion and seal integrity in hydraulic systems. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifolds, Valve Bodies, Hydraulic Fittings, Pressure Vessels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||