This high-performance brass stock sheet, precision-engineered for demanding pulling and lifting applications. Its robust construction ensures superior strength and longevity in challenging environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.421" |
| Length | 24" |
| Width | 21" |
Trusted by engineers across multiple sectors, this brass stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, critical for reliability in pulling and lifting systems. With a precise thickness of 0.421 inches, a substantial length of 24 inches, and a width of 21 inches, it provides ample material for custom fabrication. The inherent non-sparking properties of brass also make it suitable for environments where ignition hazards exist. Its machinability allows for intricate component creation within heavy-duty lifting assemblies, winches, and rigging hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely align the brass stock sheet according to the design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the load capacity. | Always select fasteners (bolts, screws, rivets) specifically designed and rated for the anticipated tensile and shear forces in pulling and lifting applications. |
| Inadequate surface preparation before mounting. | Thoroughly clean and degrease the mounting area and the brass sheet to ensure optimal adhesion and prevent premature wear or corrosion at the contact points. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Fabrication for Winch Components, Reinforcement Plates for Lifting Slings, Non-Sparking Guide Rollers in Hazardous Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||