This premium brass stock sheet, precisely manufactured to 0.402" thickness, is engineered for demanding pressure and temperature control systems. Its robust composition ensures reliable performance in critical industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.402" |
| Length | 33" |
| Width | 30" |
Specified by design engineers worldwide, this brass stock sheet boasts a nominal thickness of 0.402 inches, a substantial length of 33 inches, and a width of 30 inches, providing ample material for fabrication. Crafted from high-grade brass, it offers excellent thermal conductivity, inherent corrosion resistance, and superior machinability, making it ideal for valve bodies, pressure regulators, heat exchangers, and other components subjected to moderate pressure and temperature fluctuations. Its consistent dimensional tolerances ensure precise fits and reliable sealing in complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from debris. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Fabricate and assemble components according to detailed engineering drawings, ensuring proper sealing and joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting technique leading to burrs or distortion. | Utilize sharp, dedicated cutting tools designed for brass and maintain a steady feed rate to minimize stress on the material. |
| Inadequate surface preparation before joining or assembly. | Thoroughly clean and degrease mating surfaces to ensure optimal adhesion and prevent leaks, especially in pressure-critical applications. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Regulator Components, Valve Bodies and Trims, Heat Exchanger Plates, Temperature Control Mechanisms, Instrumentation Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||