This substantial brass stock sheet is engineered for demanding thermal management systems. Its premium brass composition ensures exceptional heat conductivity and longevity within HVAC environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 34" |
| Width | 43" |
A high-performance industrial component, this brass stock sheet is manufactured to precise tolerances, featuring a thickness of 0.384 inches, a length of 34 inches, and a width of 43 inches. The inherent thermal conductivity of brass, coupled with its excellent corrosion resistance and formability, makes it an ideal material for heat exchangers, evaporators, and condensers. This sheet's robust dimensions facilitate its integration into large-scale industrial cooling and heating systems, providing reliable and efficient thermal transfer under significant operational pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the brass sheet according to system design requirements. 3. Secure the sheet using appropriate fasteners and sealing methods, ensuring a leak-tight fit for optimal thermal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation leading to seal failure. | Thoroughly deburr and smooth all cut edges to ensure a perfect seal with mating components. |
| Over-tightening fasteners causing material deformation. | Use torque-limiting tools and follow manufacturer specifications for fastener tension to prevent stress fractures. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Fabrication, HVAC Condenser Coils, Evaporator Plate Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||