This premium brass stock sheet offers exceptional durability and corrosion resistance, making it ideal for critical pressure and temperature control systems. Precisely manufactured for reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.367" |
| Length | 12" |
| Width | 18" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.367 inches, a length of 12 inches, and a width of 18 inches. Composed of high-grade brass, it exhibits excellent thermal conductivity and formability, ensuring consistent performance in heat transfer and fluid handling applications. Its inherent resistance to corrosion and high tensile strength make it a superior choice for components within pressure regulation valves, temperature sensors, and heat exchangers, guaranteeing longevity and operational integrity under varied environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of contaminants. 2. Precisely cut or form the sheet to the required dimensions for your control component. 3. Install the formed brass component into the pressure or temperature control system according to manufacturer specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient thickness for high-pressure applications. | Always verify that the 0.367" thickness meets or exceeds the required pressure ratings for the intended application. |
| Improper handling leading to work hardening or deformation. | Handle the brass sheet with care, avoiding excessive bending or impact that could compromise its structural integrity during fabrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator valve components, Temperature sensor housings, Heat exchanger plates and baffles, Manifold construction for fluid control.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||