This high-grade brass stock sheet is engineered for superior performance in heavy-duty pulling and lifting operations. Its robust construction ensures exceptional durability and reliability under extreme stress.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.366" |
| Length | 40" |
| Width | 30" |
Specified by design engineers worldwide, this brass stock sheet offers a substantial thickness of 0.366 inches, a generous width of 30 inches, and a length of 40 inches. Composed of a premium brass alloy, it exhibits excellent tensile strength and a high yield point, making it intrinsically resistant to corrosion and fatigue, crucial for environments subject to moisture or chemical exposure. Its non-sparking properties also enhance safety in potentially hazardous atmospheres. The precise dimensions and material composition ensure consistent performance and load-bearing capacity in critical pulling and lifting machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Align the brass stock sheet precisely with the intended mounting points. 3. Secure the sheet using appropriate heavy-duty fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners that cannot support the load. | Employ fasteners specifically rated for the expected operational loads and the tensile strength of the brass sheet. |
| Improper alignment causing uneven stress distribution. | Carefully measure and mark mounting locations to ensure perfect alignment before fastening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Crane and hoist structural elements, Marine pulling and lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||