This robust brass stock sheet offers exceptional durability and corrosion resistance. Its non-sparking properties make it ideal for environments where safety is paramount, ensuring reliable performance in pulling and lifting operations.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 19" |
| Width | 28" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.352 inches, a length of 19 inches, and a width of 28 inches. Composed of high-grade brass, it exhibits excellent tensile strength and resistance to environmental degradation, making it suitable for heavy-duty pulling, lifting, and structural components in corrosive or potentially explosive atmospheres. Its inherent non-sparking nature is critical for safety-sensitive industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the brass stock sheet according to the project design specifications. 3. Secure the sheet using appropriate fasteners and structural adhesives, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners in a corrosive environment. | Employ stainless steel or brass-compatible fasteners to prevent galvanic corrosion. |
| Over-torquing fasteners, leading to sheet deformation. | Apply fasteners to the recommended torque specification to maintain structural integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty pulling mechanisms, Marine lifting equipment components, Industrial material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||