Engineered for superior performance in heating and cooling systems, this brass stock sheet offers exceptional thermal conductivity and corrosion resistance. Its robust dimensions ensure suitability for a wide range of industrial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.338" |
| Length | 39" |
| Width | 37" |
Designed for demanding industrial environments, this brass stock sheet (0.338" thickness, 39" length, 37" width) is fabricated from high-grade brass, renowned for its excellent thermal conductivity and superior corrosion resistance. This material composition makes it an ideal choice for heat exchangers, evaporators, and condensers within HVAC systems, ensuring efficient energy transfer and long operational life under challenging conditions. Its precise dimensions facilitate seamless integration into manufacturing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to ensure optimal adhesion and conductivity. 2. Precisely cut the brass sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the sheet using approved welding, brazing, or mechanical fastening methods, ensuring leak-tight seals where necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burring or deformation. | Employ carbide-tipped saws or abrasive cut-off wheels specifically designed for brass to achieve clean, precise cuts. |
| Inadequate surface preparation before joining, compromising weld or braze integrity. | Abrade the joining surfaces with fine-grit sandpaper or a wire brush to remove oxidation and contaminants before proceeding with the connection. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Fabrication, Evaporator and Condenser Coils, HVAC System Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||