This brass stock sheet offers exceptional durability and corrosion resistance, ideal for robust pulling and lifting applications. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.325" |
| Length | 18" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.325-inch thick brass stock sheet measures 18 inches in length and 15 inches in width. Composed of a high-copper alloy, it exhibits superior tensile strength and excellent machinability, making it suitable for custom fabrication. Its inherent non-sparking properties are critical for hazardous environments, while its resistance to corrosion ensures longevity in wet or chemical-exposed conditions. This material is engineered for consistent performance in load-bearing components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the brass stock sheet, aligning it with pre-drilled holes or mounting points. 3. Securely fasten the sheet using appropriate hardware (bolts, screws, rivets) with proper torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can corrode or weaken the joint. | Utilize brass or other compatible, corrosion-resistant fasteners to maintain structural integrity and prevent galvanic corrosion. |
| Over-tightening fasteners, which can deform the brass sheet or crack the mounting surface. | Apply fasteners to the recommended torque specifications, using a torque wrench if necessary, to avoid over-stressing the material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated lifting hardware, Non-sparking tool components, Corrosion-resistant structural plates for marine or chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||