This premium brass stock sheet is engineered for critical hydraulic applications. Its robust composition and precise dimensions ensure superior performance and longevity in fluid power systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.322" |
| Length | 15" |
| Width | 44" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.322 inches thick, 15 inches in length, and 44 inches in width. Fabricated from high-grade brass alloy, it offers excellent machinability, superior corrosion resistance against a wide range of hydraulic fluids and environmental conditions, and good strength. These properties make it ideal for fabricating custom hydraulic manifolds, valve bodies, fittings, and other high-pressure fluid handling components where reliability and precision are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully measure and mark the sheet for cutting according to design specifications. 3. Utilize appropriate cutting tools and techniques for brass to achieve clean edges and desired shapes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and uneven edges. | Employ carbide-tipped saws or abrasive cut-off wheels designed for non-ferrous metals. Ensure cutting speed and feed rate are optimized for brass to minimize heat buildup and prevent tool damage. |
| Inadequate deburring after cutting, compromising sealing surfaces. | Thoroughly deburr all cut edges using a file or chamfering tool. Pay close attention to areas that will be machined or form part of a sealing interface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Valve Bodies and Components, Custom Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||