This high-performance brass stock sheet, precisely engineered at 0.293" thick, 32" long, and 25" wide, is ideal for robust pulling and lifting applications. Its inherent material properties ensure superior durability and reliability.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.293" |
| Length | 32" |
| Width | 25" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional strength and corrosion resistance, making it a superior choice for demanding industrial environments. With a precise thickness of 0.293 inches, a substantial length of 32 inches, and a generous width of 25 inches, it provides ample material for custom fabrication in critical pulling and lifting systems. The inherent properties of brass, including its non-sparking nature and excellent conductivity, further enhance its suitability for specialized applications where safety and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Position the brass stock sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners designed for the intended load and environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the load capacity. | Always select fasteners with a tensile strength and shear strength that significantly exceeds the anticipated working load. |
| Improper surface preparation leading to reduced adhesion or stress points. | Thoroughly degrease and, if necessary, abrade the mounting surface to ensure optimal contact and load distribution. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom hoist components, Reinforcement plates for rigging, Wear pads in pulley systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||