This robust brass stock sheet, measuring 0.287 inches thick, 37 inches in length, and 40 inches in width, is engineered for demanding pulling and lifting operations. Its superior material properties ensure reliability and longevity in industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.287" |
| Length | 37" |
| Width | 40" |
Manufactured under strict quality controls, this brass stock sheet exhibits excellent tensile strength and ductility, crucial for load-bearing applications. The material's inherent corrosion resistance ensures longevity in harsh environments. Its non-sparking properties make it ideal for hazardous areas. Precision cut to 0.287" thickness, 37" length, and 40" width, it meets exacting industrial standards for structural integrity and performance in pulling and lifting assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the brass sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques, adhering to structural load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for securing the sheet. | Always utilize fasteners rated for the expected tensile and shear loads to ensure structural integrity. |
| Not verifying material compatibility for welding or joining. | Confirm that any welding or joining processes are compatible with brass alloys to prevent material degradation and ensure a strong bond. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates in pulling and lifting equipment, Custom fabricated structural components for cranes and hoists, Durable backing plates for winches and cable management systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||